Deck & Fence Staining Services

Does your deck look like this?	How to Measure your Deck Project! STEP 1 - Inspect the deck for any problem incurred by weathering. STEP 2 - Lets say your deck is 10 feet deep by 20 feet long you would then multiply 10 X 20. Which would give you 200 square feet. Now if your deck had railings and you measured that and got 4 feet high by 20 feet long which you would again multiply the two and get 80 square feet. Deck=200sq Rail= 80sq Total 280sq STEP 3 - Fill out our estimate form or call us at 678-357-2967
Want to make it look like this?

With our deck staining services, you can get your deck looking just like new!
We offer deck staining in six colors:

005 Light Brown	012 Natural Cedar
015 Medium Brown	020 Medium Red
025 Dark Brown	030 Dark Red

This is a dark red deck

Here is how we stain our wood:

1. Assess the area to be treated look for loose or rotted wood. Strip and or clean wood area to make sure no dirt, debris, oils or old stain remains on surface.

2. Treat the area with wood brightener to obtain proper PH so the stain will penetrate the wood surface properly.

Test area for moisture content depending on weather conditions.
4. Apply two coats of Ready Seal®, and allow 24 hours to dry.

5. That’s it! Your deck is protected and ready to enjoy for years to come!

What is READY SEAL®?

"Ready Seal®" is an oil based semi-transparent sealer and stain in one. It is a unique blend of resin, pigment, oil, and algaecide that penetrates deeply into wood to protect and preserve it from the elements. "Ready Seal®" can be used on all types of wood. "Ready Seal®" contains trans-oxide pigment that acts as the UV protection. The trans-oxide pigment help protect your wood from fading and graying. Darker colors provide more UV protection. In a random poll of over 10 products, Ready Seal® was the clear cut favorite for deck projects.

Before and after example using are READY SEAL® technology.

Why use READY SEAL®?

1. This semi-transparent oil sealer is available in eight deep rich neighbor-impressing colors. "Ready Seal®" gives your wood soft, natural color with no sheen.

2 "Ready Seal®" will not form a sheen or coating yet seals the wood to protect agenst the elements.

3 Ready to walk on in less than 1 hour.

4 "Ready Seal®" inert paraffinic oil does not contain any sugars or starches( like mineral or vegetable oil sealers) that promote the growth of mold or mildew.

5 Fully penetrates dry wood without leaving any coating, looks completely natural. Never shows runs, laps, or streaks like other stains or sealers.

6 Lasts 4-5 years on vertical surfaces , 2-3 years on horizontal surfaces.

7 No stripping necessary to recoat "Ready Seal®". Just simply wash the surface and recoat.